POWER 1000 Universal Power Measuring Instrument for all Electrical Systems • Complete power analysis with simultaneous measurement of all relevant electric supply quantities • Power and energy analysis in power supply systems, as well as at the outputs of frequency converters • Harmonic analysis up to the 50th harmonic including sub- harmonics • Flicker analysis in accordance with EN 61000-4-15 • 8 isolated measuring circuits (4 voltage and 4 current), 100 kHz sampling rate per measuring circuit • Color touch-screen display, 5½", ¼ VGA • Storage of measurement data / settings to plug-in CF memory card or USB memory stick • Transient measurements, 1300vpk as short as 10usec • USB interfaces for PC, external printer/memory/keyboard • Ethernet TCP/IP with integrated web server for remote control and read-out • 4 digital status inputs for indicating consumer operating states • 4 digital control inputs for synchronizing the measuring interval, and for use as meter inputs • 1 relay output for alarms • Internal rechargeable battery with charging controller for power failures • Worldwide use is made possible with a broad range variable power pack (85 to 250 V AC/DC) The POWER 1000 is suitable for broadband Building Services and Operations measurement of electrical quantities in DC systems, Technology as well as single and 3-phase AC systems with any • Acquisition and recording of mains power load and line frequencies of up to 1000 Hz. Even in anomalies for the clarification of interference in systems with variable frequency – at frequency the electrical installation and at power consumers converter outputs –the POWER 1000 is first choice, • Recording and analysis of start-up and operating for a wide range of applications: performance of standby generating plants • Measuring and recording of characteristic Energy Technology electrical quantities for dimensioning static VAR • Measurement in low and medium-voltage* compensators, and testing it for correct systems including features for evaluating power functioning quality indices • Load and energy consumption measurements in • Measurement and recording of electrical electrical distribution systems or at operating operating parameters for wind turbine generator equipment for the detection of critical operating systems together with wind speed* states or potential energy cost-savings • Measurement and recording of electrical operating parameters for photovoltaic energy Drive Technology systems together with light intensity* • Power measurements at electrical motors with simultaneous recording of mechanical quantities Electrical Engineering such as RPM, torque, pump pressure or flow rate* • EMC testing of electrical devices and systems, including harmonics and flicker • Determination of characteristic motor values  during operation with a frequency converter • Measurement of static and dynamic alternating and direct current quantities at • Vehicle and Aircraft Manufacturing, Shipbuilding electrical/electronic products in R&D, • Measurements at generators and power manufacturing, the test lab and for service consumers in DC automotive electrical systems applications • Power and harmonics measurements in locomotives and railway electrical systems • Power and harmonics measurements for onboard * requires additional transducer electrical systems in aircraft and ships Symbol Measured Quantity Unit of Chan Chan4 Sum Measure 1-2-3 1-3 Ux L-N voltage, RMS value V X X X UΔx L-L voltage, RMS value V X X Ix Phase current, RMS value A X X X Px Active power W X X X Sx Apparent power VA X X X Qx Reactive power var X X X Dx Distortion power var X X X Qcx Compensation power for reaching setpoint of cosφ var X X X WP+x Active energy import Wh X X X WP-x Active energy export Wh X X X WSx Apparent energy VAh X X X WQx Reactive energy varh X X X cosφx Displacement power factor -- X X φx Phase-shift angle °[degrees] X X PFx Power factor (P/S) -- X X X CFUx Voltage crest factor -- X X X CFIx Current crest factor -- X X X fx Voltage frequency Hz X X ux(t) Voltage waveshape V X X ix(t) Current waveshape A X X px(t) Active power waveshape W X X AsymU Voltage unbalance of the 3~ system % X SeqU Phase sequence of the 3 voltages 123/321 X FLICKER Pmtx Momentary flicker for voltage X X Ux Pstx Short-term flicker (10 min.) for voltage X X Ux Pltx Long-term flicker (2 h) for voltage X X Ux HARMONIC DISTORTION Vx THD, Vx THDG, Total, Group total, and Subgroup total harmonic distortion for X % Vx THDS voltage Vx PWHD Partial weighted harmonic distortion for V x within an adjustable X X % range from hmin to hmax Vx H0, Vx H1, Voltage of DC component, Fundamental, and harmonic group X X V, % Vx H2 …V x H50 for Ix (absolute and relative to VxH1) Vx HG1 …Vx HG50, Voltage of harmonic group and subgroup X X V, % Vx HS1 …Vx HS50, (absolute and relative to VxH1) Vx IG1 …Vx IG49 Voltage of inter-harmonic group and subgroup X X V, % Vx IS1 …Vx IS49 (absolute and relative to VxG1) Ix THD, Ix THDG, Total, Group total, and Subgroup total harmonic distortion for X X % Ix THDS current Ix PWHD Partial weighted harmonic distortion for Ix within an adjustable X X % range from hmin to hmax Ix H0, Ix H1, Current of DC component, Fundamental, and harmonic group X X A, % Ix H2 …Ix H50 for Ix (absolute and relative to IxH1) Ix HG1 …Ix HG50, Current of harmonic group and subgroup X X A, % Ix HS1 …Ix HS50, (absolute and relative to IxH1) Ix IG1 …Ix IG49 Current of inter-harmonic group and subgroup X X A, % Ix IS1 …Ix IS49 (absolute and relative to IxG1) Px H0,Px H1, DC, Fundamental, h2 ... h50 power component of Px (absolute X X W, % Px H2 …Px H50 and relative to PxH1) X X ∏ Ux H0 …∏Ux H50 Phase angle of harmonic h0 ... h50 for Ux to fundamental °[degrees] voltage UxH1 X X ∏ Ix H0 …∏Ix H50 Phase angle of harmonic h0 ... h50 for Ix to fundamental °[degrees] current IxH1 Characteristic Specification Notes VOLTAGE INPUTS Quantity 4 Mutually isolated Connection Two 4 mm safety sockets each Red (high), black (low) Connection options Single phase, 2-phase (split-phase), 3-phase wye or delta Input impedance 4 M // 5 pF  Coupling AC / AC+DC Input range 0 to 150 V / 300 V / 600 V / 900 V Manually selectable Scaling factors 0.001 to 99,999 V/V Individually adjustable for each input Overload withstand Continuous: 1200 VRMS, transient (1.2/50 μs): 6000 Vpeak CURRENT INPUTS For clamp-on probes or shunts Quantity 4 Mutually isolated Connection Two 4 mm safety sockets each Red (high), black (low) Connection options 3xL + N, 3xL, 2xL + N (two-wattmeter method) L1, L2, L3, N (calculated) Input Impedance 1 M // 5 pF  Coupling AC / AC+DC Input range 0 to 300 mV / 3 V Manually selectable Scaling factors 0 / 0.001 to 99,999 V/V Individually adjustable for each input Overload withstand Continuous: 400 VRMS, transient (1.2/50 μs):1000 Vpeak VOLTAGE and CURRENT Sampling rate 100 kS/s Simultaneously at each Sampling resolution 16 bit Frequency range DC, 15 Hz to 10 kHz Crosstalk -60 dB between voltage channels, attenuation -95 dB between voltage and current DIGITAL INPUTS Quantity 4 Floating, common reference point Functions Display and record state, count pulses Connection Plug-in connectors with screw terminals DC input signal Low: <3V, High: 5 to 24V Overload withstand 30V, continuous CONTROL INPUTS Quantity 4 Functions Start/Stop recording; Synch demand interval Connection Plug-in connectors with screw terminals DC input signal Low: <2V, High: 4 to 5V Overload withstand 6V, continuous ALARM OUTPUT Function Floating relay contact for Limit exceed, 30V @ 1A max Accuracy Range 15-65-Hz DC – 1000Hz 1-10KHZ 1.0 to 900 V rms +/- 0.2% rdg +/- 0.1% range +/- 0.4% rdg +/- 0.2% range +/- 1% rdg RMS VOLTAGE +/- 0.5% rng 0.0 to 3.00 A rms +/- 0.2% rdg +/- 0.1% range +/- 0.4% rdg +/- 0.2% range +/- 1% rdg +/- RMS CURRENT 0.5% rng V & I dependent +/- 0.5% rdg +/- 5% range POWER 1.0 to 900 V rms +/- 3% rdg +/- 0.1% range +/- 5% rdg +/- 0.2% range V HARMONIC – Absolute V Phase Angle -180* to + 180* 1 deg * Harm# 2 deg * Harm# 0 to 200% 2% 4% VTHD 0.0 to 3.00 A rms +/- 0.2% rdg +/- 0.1% range +/- 0.4% rdg +/- 0.2% range I HARMONIC – Absolute I Phase Angle -180* to + 180* 1 deg x Harm# 2 deg x Harm# 0 to 200% 2% 4% I THD FREQUENCY 15 To 99.9 +/- 0.05% rdg +/- 1 digits 100 to 999 +/- 0.1% rdg +/- 2 digits 1KHz to 10Khz +/- 0.2% rdg +/- 3 digits > 10KHz +/- 0.5% rdg +/- 5 digits Display: Color LCD touch screen, ¼ VGA, 320x240 pixels, CCFL backlight Memory: Internal 50M Flash, plug-in Compact Flash card, plug-in USB data storage media Time Clock: 10msec resolution, max 5 sec per month drift Power Supply: 85-250VAC/DC, 45-400Hz, 40W max, 20 minute backup battery (after 2 hr charging) USB Host: USB 1.1 Interface for recording data and setups, and installation of firmware updates Slave: USB 1.1 Interface for remote control of instrument, and transfer of measurement and setup files Ethernet: 10/100 Base T (RJ45), Protocols: TCP/IP, HTTP, FTP Operating Range: 0 to 40 deg C within spec, -10 to 50 deg C with reduced accuracy; max 95%RH w/o condensation for 0 to 25deg C, max 75% 25 to 40 deg C 2000 M altitude Physical Dimensions: 290 x 245 x 140 mm, 2.4 kg without accessories Mechanical Protection: Housing IP30, Terminals IP 20 Electrical Safety: Safety Class I per IEC 61010-1, Measuring: 600V CAT IV, 1000V CAT III Electromagnetic Compatibility: Per EN 61236, compiles with EC directive 89/336 STANDARD ACCESSORIES: • (1) set of cables for voltage measurement inputs including 4 pairs of measurement cables (length: approx. 2 m) with test probe and plug-on alligator clips • (3) short measurement cables with 4 mm safety plugs (stackable) for bridging measurement inputs • (1) power cable with protective contact plug and inlet plug • (1) USB-A interface cable • (1) Ethernet interface cable • (1) stylus pen • (1) printed copy of operating instructions • (1) CD ROM with latest operating instructions, technical data sheet and respectively measuring notes • (1) lockable carrying case for instrument and accessories OPTIONAL ACCESSORIES: • Current clamp-on probes (1-1000A), flexible probes (1 to 20KA); shunts 20mA to 16A) • DranView software 1.800.372.6832 sales@dranetz-bmi.com tel 732.287.3680 : fax 732.248.1834 1000 New Durham Road, Edison, New Jersey 08818 USA © 2009 Dranetz-BMI. All rights reserved. www.dranetz-bmi.com Printed in United States. Specifications are subject to change without notice. Power1KI Rev 19-Nov-09