ENCORE SERIES / 61000 SYSTEM SPECIFICATIONS VOLTAGE MODULES POWER QUALITY TRIGGERS 1 • Channels: (4) differential inputs, AC/DC • V & I RMS (Sag/Dip, swell, interruption) 1 cycle resolution, ⁄2 cycle steps as per IEC61000-4-30 • Sampling: 512 samples/cycle, 16bit A/D, synchronous sampling. Range: 1-600 Vrms, +/- 1000VPK - Reference: L-L, L-N • Frequency: 16/20Hz, 50Hz, 60Hz, 400Hz (optional) - Pre/Post cycles : 30 pre (max), 10,000 post (max) • Full Scale Accuracy: 0-600V 0.1% reading +/- 0.05% full scale, 7KHz bandwidth for • Transients: low/medium frequency transients - Waveshape Triggers: Cycle by cycle, RMS deviation 100-300V AC 0.1% reading for IEC61000-4-30 - High speed transients (optional) • Input impedance: 10MΩ to ground - Peak transient • Choice of connections: Screw terminals, safety connectors, D connector for use with (optional) remote pod with screw terminals. Choose one. • Journals (stored parameters): High, low, very-high, very-low • Optional: Anti Aliasing filters MEASURED PARAMETERS (NOT LIMITED TO THE FOLLOWING) • Optional: High Speed transients (total of 2 slots) • Power - Sampling: 1MHz - V, I, W, VA, VAR, TPF, DPF, Demand, Energy, etc. - Accuracy: +/-10% reading, +/- 0.5% full scale • Harmonics/Interharmonics/Distortion (per IEC61000-4-7) CURRENT MODULES - Harmonics individual harmonic spectrum to the 63rd for V & I • Channels: (4) differential inputs, AC/DC - Vthd, Ithd, Vtid, Itid, K factor, TDF, TIF, more • Sampling 512 samples/cycle, 16 bit A/D. Range: Full scale current = 1.5Vrms, crest factor of 3 - 5 user specified frequencies • Accuracy: 0.1% reading +/- 0.05% full scale, 3KHz bandwidth for low/medium freq. transients. - Unbalance: Symmetrical components, worst from ave. Does not include CT. • Flicker (per IEC61000-4-15, IEEE1453): Pst, Plt, sliding Plt • Choice of connections: TR connectors, D connector for use with (optional) remote 5A or 1A pod with screw terminals or 5A/20X pod with feed through tubes. Choose one. COMMUNICATIONS: • Optional: Anti Aliasing filters • 10/100BaseT Ethernet, RS232, RS485, USB (future functionality) • Optional High Speed transients • Optional GSM/GPRS, Analog modem - Sampling: 1MHz • Protocols: XML, Modbus TCP/RTU, HTTP - Accuracy: +/-10% reading, +/- 0.5% full scale • Time synchronization: NTP, optional GPS USER INTERFACE VOLTAGE TRANSDUCER INPUT MODULE • Remote: Web browser via Encore Series Software:. Primary UI for setup, trends, reports, real • Channels: (4) differential inputs, DC coupled time. Available languages; English, Spanish, French, German, Italian. Instrument web • Sampling: 100KHz. Range: 0-24VDC browser for metering. English only. • Accuracy: 0.1% reading +/- 0.05% full scale plus transducer accuracy 1 • Optional Local Display: ⁄4 VGA touch screen remote display, rack mounted display. Languages: 12 • Input impedance: >100KΩ to ground GENERAL SPECIFICATIONS • Connections: Screw terminals • Size (HxWxD): 4" x 11" x 8" (10.2cm x 28cm x 20.3cm), Weight: 4.2 pounds (1.9 kg) CURRENT INPUT TRANSDUCER INPUT MODULE • Operating Temperature: -10º to 60º C • Channels (4) differential inputs, DC coupled • Storage Temperature: -40º to 85º C • Sampling: 100KHz. Range: 4-20ma • Humidity: 10 to 95% non-condensing • Accuracy: 0.1% reading +/- 0.05% full scale plus transducer accuracy • System Time Clock-Crystal controlled-1 ms resolution • Connections: Screw terminals • Power supply: 12VDC - 15 minute internal UPS DIGITAL INPUT MODULE - AC supply: 90-264 VAC 47-63 Hz • Channels: (8) - Optional 125VDC, 220VDC, 48VDC • Sampling: 1KHz. Range: 0-135V AC/DC • Memory 1GB, internal • Triggers: Edge, level • Connections: Screw terminals SYSTEM CONTROLLER • Industrial grade computing platforms: InfoNode model 5502 (CF memory), RELAY OUTPUT MODULE 5504 (hard disk). Choose one. • Channels: (4) MISCELLANEOUS OPTIONS • Max voltage 250VAC/DC • Enclosures: Weather resistant, rack, wall, switchgear • Type: Form C • CT’s: Clamp-on, split core, solid core, flex, DC MONITORING/COMPLIANCE • IEC61000-4-30 Class A, IEC61000-4-7, IEC61000-4-15 • EN50160, NVE, IEEE1159, IEEE1453, IEEE519, IEEE1459 • IEC61000-3-6/7 REVENUE ACCURACY • ANSI C12 - ANSI C12.1 Accuracy compliant - ANSI C12.20.0.2 compliant • IEC - IEC 60687 0.2S compliant - IES 60687 accuracy class 0.5S compliant 1.800.372.6832 sales@dranetz-bmi.com tel 732.287.3680 • fax 732.248.1834 • 1000 New Durham Road • Edison, New Jersey 08818 • USA ENCORE Series, PQVIEW and DRAN-VIEW are trademarks of Dranetz-BMI. ©2005 Dranetz-BMI. All rights reserved. dranetz-bmi.com Printed in the United States. Specifications are subject to change without notice.