8010/8020

Dranetz has Discontinued this product and we strongly recommend that you consider upgrading your instrument to the recommended product upgrade: Encore 61000 SG, Encore 61000 STD.
Please note: This is a discontinued product. Options/Accessories associated with this product may no longer be available.

Not Ready to Upgrade?

Dranetz provides several options to help you upgrade your product affordably. We can work with you to determine the best solution for your situation. Contact our Sales department today as ask about our trade-in options. If you are unable to upgrade, please be aware that your instrument should be serviced and calibrated yearly for optimal accuracy, and you may be eligible for service incentives. Please contact our sales department to discuss your situation.

Features & Highlights

• Setting and monitoring utility power quality standard
• Co-gen and other contract compliance monitoring
• Substation monitoring
• Volts and amps (true RMS)
• rms sags, swells, interruptions
• rms min/average/max strip charts
• Waveshape faults
• High-speed impulses
• Outages and cold-load pickup
• Frequency
• Periodic snapshots of kVA, kVAR, true PF, dPF
• Simultaneous sampling of voltage and current on all phases

Specifications

Voltage Inputs

Phase A, B, C, Neutral, and Ground (supports single phase, split single phase, 3-phase 4-wire wye, 3-phase 3-wire delta)

Current Inputs

Phase A, B, C, and Neutral using built-in 25 Amp (pk), 10 amp RMS pass-though CT's

Voltage Measurements

0 - 600 Vrms (±1,000 Vpk) or 0 - 170 Vrms (±250 Vpk), user selected 50/60 Hz

Current measurements

50 - 6000Vpk Peak detection, IEEE 587 type A and B
Accuracy: ±5% reading ±5% full scale

Sampling Rate

256 samples per cycle, continuous on all voltage channels; 128 samples per cycle, continuous on all current channels; Phase-locked sampling technique employed

Harmonic Measurements

Through 127th voltage harmonic, 63rd current harmonic at 50/60 Hz

Triggers

Voltage-only, waveshape fault, swell, sag, interruption, impulse, periodic waveshape capture, cold load pickup

Pre- and Post-Trigger

0 - 15 cycles voltage and current, user selectable. Additional post-trigger rms data available on swell, sags, and cold-load pickup.

Instrument Power

90 Vrms - 250 Vrms, 45 Hz - 65 Hz
Power factor > 0.97
Power consumption < 40 VA
Impulse tolerance 6 kV
Suitable for attaching directly to monitored circuit.

Environment

Optional NEMA-4X Rain-,dust-,ice-resistant enclosure -22^°F to 122^°F (-30^°C to +50^°C)
Humidity 0% - 95% non-condensing.

PC Software

PASS (limited support in PES)

Certifications

FCC, ISO-9001

Typical Applications

Outdoor Service

Utilities mount 8010 PQNodes outdoors on power poles. Regardless of weather, the 8010 provides detailed, accurate, standard-setting power quality data.

Indoor Service

Indoor mounting of the 8010 PQNode at substations and critical customer loads works well, too. Note the neat, easy-to-use built-in current transformers; just pass the 0 - 10 Amp conductor through the insulated tube, and the 8010 PQNode will take care of the rest.

Options and Accessories for 8010/8020

Options & Accessories

Communications Option

Internal modem with error-correcting, data compressing and surge protection.

15 Minute Battery

B-801 provides 15 minutes operation in the event of a power failure.

1 Hour Battery

B-802 provides one hour operation in the event of power failure.

8 Hour Battery

B-803 provides 8 hours of operation in the event of power failure.