7100/7100S
The 7100 PQNode® can be permanently installed at a site, or transported from site to site as a portable instrument. 7100 PQNodes can be configured to monitor power quality, power flow, or harmonics, depending on site-specific needs.
(The 7100S PQNode® is designed to be permanently installed in industrial or substation switchgear.)
The 7100 comes complete with a dial-up and dial-out modem.
Upgrade Now!Dranetz has Discontinued this product and we strongly recommend that you consider upgrading your instrument to the recommended product upgrade: *No Direct Upgrade, Contact Us for Recommendation.
Please note: This is a discontinued product. Options/Accessories associated with this product may no longer be available.
Not Ready to Upgrade?
Dranetz provides several options to help you upgrade your product affordably. We can work with you to determine the best solution for your situation. Contact our Sales department today as ask about our trade-in options. If you are unable to upgrade, please be aware that your instrument should be serviced and calibrated yearly for optimal accuracy, and you may be eligible for service incentives. Please contact our sales department to discuss your situation.
Specifications for the 7100/7100S
Voltage inputs
Phase A, B, C, Neutral, and Ground (supports single phase, split single phase, 3-phase 4-wire wye, 3-phase 3-wire delta)
Current inputs
Phase A, B, C, and Neutral using optional current probes
Voltage measurements
0 - 600 Vrms (±1,000 Vpk), 50/60 Hz
Accuracy: ±0.5% reading ±0.35% full scale
Voltage transients
100 - 1500 Vpk
Peak detection: IEEE 587 type A and B
Accuracy: ±5% reading ±5% full scale
Current measurements
4 fully independent current channels
0 - 3000 Amps rms (depends on probe selected)
Accuracy: ±1% reading ±1% full scale
Sampling rate
128 samples per cycle, continuous on all voltage and current channels
Harmonic measurements
Through 49th harmonic at 50/60 Hz
User-Selected Modes
Power quality: snapshots,rms strip charts, sags, swells, impulses, waveshape faults, kWand kVA demand, harmonic snapshots to the 49th, kWh
Power flow:Vrms,Irms,W,VA,kW and kVA demand,kWh,kVAR,PF,dPF, Vthd,Ithd
Harmonics triggering:Vthd,Ithd,Vn and In stripcharts, triggering on individual harmonics to the 49th,1-cycle or 4-cycle FFT's
Environment
Rain-,dust-,ice-resistant enclosure
-4°F to 113°F (-20°C to +45°C)
Humidity 0% - 95% non-condensing
Battery
10 minute UPS built in
External battery supported
Software
PES
Certifications
CE, FCC, ISO-9100
Applications for the 7100/7100S
Typical Applciations
Remote Power Monitoring
Electric power is critical at remote telecommunication sites, but you can't afford to send a technician to check it regularly. Solution: install a 7100 PQNode®. Its power quality mode will notify you about any disruptive or damaging disturbances, and its harmonics mode will track deterioration in power supplies and battery chargers.
Power Changes Immediately Tracked
Aggressive utilities use the 7100 to monitor the power at all their critical customers and substations, identifying opportunities for improvement and documenting the high level of quality power. With the 7100's advanced signatures, any power changes that can affect the process can be immediately tracked to their source.
Please note: This is a discontinued product. Options/Accessories associated with this product may no longer be available.
Options and Accessories for the 7100/7100S
Options & Accessories
IM-710
Communications option: internal 14.4 kbaud modem with surge protection. (Factory Installed)
GPS-710
GPS (satellite) receiver for precision time stamps. (Factory Installed)
CT-5
High accuracy current probe, 0 - 5A RMS
Max conductor size 0.47"
±0.1% of full scale ±2% of reading
CT-5A
High accuracy current probe, 0 - 5A RMS
Max conductor size 0.47"
±0.1% of full scale ±2% of reading
WCT-5
High accuracy current toroid, 0 - 5A RMS
Max conductor size 0.47"
±0.1% of full scale ±1% of reading
CT-150
Clamp-on, 5 - 150A
Max conductor size 1.18"
±0.2% of full scale ±1.5% of reading
CT-600
Current probe, 600A RMS
Max conductor size 2.0"
±1% of full scale ±1% of reading
FCT-600
Flexible Current probe, 600A RMS
7.0" inside circular diameter
±1% of full scale ±1% of reading
CT-3000
Current probe, 3000A RMS
Max conductor size 2.56" or 1.97"x5.3"
±0.1% of full scale ±1% of reading
SPA-01
Smart Probe Adaptor
A-023
FuseClip Voltage Connector Set